Sewchet

Sewing, crochet, crafts, accessories, baking, tutorials,


35 Comments

Patchwork Quilt Made From Old Tea Towels And Pillowcases

Every year the school holds a Summer fair to raise funds for the PTFA and I make various things for them to sell or raffle, often at the last minute, so I’m feeling a little bit smug that I’ve already started this year – and it’s not until June!

In three mammoth jam-making sessions I managed to make 42 jars of Blackberry and Apple jam, 25 of which are being donated for the school fair.

img_4913

Last year there was a ‘Horsington’s Got Talent’ stall, whereby parents and pupils make all manner of crafty things to sell, and for which I made lots of things. It was a huge success, selling out completely apparently, so the Committee have put out another request for handmade items.

As I inevitably end up spending quite a bit of money on things I make like sugar and lemons for the jam, all the ingredients for 50 scones and cakes for the cake stall, I try to make the crafty items out of things I can source for free or that I already have in my supplies.

Like this pile of (freshly laundered) pillowcases and tea towels, all surplus to requirements and acquired from several different people who know I can’t say no to gifts of leftover/unwanted fabrics.

I don’t know what you see when you look at this mix but, add in a bit of vintage lace trim and it screams “Patchwork quilt” to me. No? Well, that’s how my mind works, anyway:)

The very word ‘vintage’ conjures up images of faded florals and linens, so I picked out the remaining old Ikea pillowcases (some of which had been cut up to make hats for the jars of jam) and 3 or 4 neutral tea towels which would work nicely.

My Olfa quilting set made short work of cutting out the 48 6″ squares needed to make a quilt just large enough for a single bed.

I laid them all out on the floor and fiddled around until I was happy with the arrangement.

img_4952-1

All seams were stitched with 1/4″ seam allowance and pressed as each strip was completed.

This is the finished quilt top.

img_4955-1

For the backing, I had to piece together bits of wadding and leftover curtain lining to make up the size I needed.

With right sides facing, lay the lining on the quilt top, then the wadding on top again.

I stitched around all four sides, leaving a gap through which to turn the quilt. Then the lace trim was sewn to the edge.

Finally I added a little “Sewchet” label.

img_4958

img_4959

I may go back and add a bit of hand quilting if I get time, but it actually doesn’t need it.

img_4960

It’s just the right size to be a comforter on a single bed, or would make a cosy lap blanket for the sofa.

img_4961

img_4963

It took me six hours yesterday to make, so the fact that it will probably be sold for about a fiver has to be put to the back of my mind – but at least the fabric was free!


57 Comments

How To Make A Waterproof Patchwork Picnic Blanket And Carry Pack

Ah, the English Summer! What does it mean to you?

For me, it’s day trips to the coast, balmy evenings sat outdoors until after sundown, weekend breakfasts in the garden, outdoor concerts in the grounds of old ruins……in short – being outside.

And being outside is made all the more perfect if you take that most quintessentially English thing with you – a picnic. Dressed down with sandwiches and a flask of tea at the seaside, or glammed up with champagne and a candelabra for a classical concert, everyone loves a picnic, with a soft, warm, waterproof picnic blanket to relax on in comfort…….

……except we haven’t got one.

Well, we didn’t have until recently when I decided to take advantage of being part of the Minerva Crafts Blogger Network and make one.

I didn’t want to make just any old picnic blanket, oh no, I wanted the ‘deluxe’ version, something a bit special, so decided to make a patchwork blanket with a waterproof backing and a carry handle. As there are four boys in the house (if you include Mr H-L), anything too pink and girly was out of the question, but I thought I could get away with a small floral print if the main colour was blue.

After much deliberation, this is what I finally ordered: – 1.5m each of plastic coated red ginghamfloral patchwork print polycotton, and denim blue polycotton. This makes a blanket approximately 1.25m x 1.25m.

P1050797

My Olfa Quiltmaking Kit came with this mat, rotary cutter and 6.5″ square ruler, so I kept things simple by cutting the patchwork squares the same size as the ruler.

P1050801

Cutting through folded fabric made short work of all those squares as I could cut through four layers at a time – using a rotary cutter and the quilting ruler ensured that they were accurately cut, which is essential in patchwork.

P1050798

In no time at all I had two piles of neatly stacked patchwork squares, 36 of the floral and 45 of the plain making 81 in total.

P1050799

The easiest way to keep accurate seam allowances is to line up the edge of the fabric with the edge of the machine foot, the needle in the central position. On my machine, that means a seam allowance of 1cm throughout.

P1050802

Whilst it may sound obvious, there is a quick way to whizz through all those squares.

Start by sewing them in pairs, each floral with a plain, right sides together. You will need to make 36 pairs which should leave you with 9 spare squares – 5 plain and 4 floral.

Don’t bother reversing your stitching at the beginning and end of each set, cutting the thread and repeating with the next pair – just keep feeding the pairs through the machine one after the other as shown below.

P1050804

When all the pairs of squares are sewn, snip the joining stitches to separate them.

P1050805

P1050806

Repeat this process with the pairs of squares…

P1050809

….until you have rows of 4….

P1050810

….then sew the rows of 4 together to make rows of 8. Now add one of your left over squares to the end of each row.

You should now have 9 rows of 9 squares.

Press all the seam allowances to one side.

P1050814

To minimise any bulk at the seams, you may wish to alternate the direction in which you press them flat.

P1050821

Join these rows along the long edges, matching and pinning the seams as you go.

P1050815

P1050816

Continue until all your strips of patchwork are sewn together into one large square.

P1050817

P1050823

As I reached this stage, I made the spontaneous decision to add a layer of wadding between this top layer and the bottom layer. (I had plenty in my stash, but you can buy it here.)

I cut a square of wadding slightly larger all the way around than the patchwork piece, laid it on top of the wrong side of the patchwork and pinned it around the entire edge.

IMG_2039

IMG_2040

Stitch close to the raw edges all around the outside and trim the excess wadding as shown.

IMG_2046

Now the wadding is secured, you can use large tacking stitches through both layers to stop them shifting whilst quilting.

Stitch in the ‘ditch’ using a long stitch length until the whole blanket has been quilted along the seam lines.

IMG_2041

Place the quilted layer onto the vinyl backing, wrong sides together, and trim the backing so that it is 1.5cm bigger than the top all the way around.

P1050823

Using clips, fold the excess vinyl over to the right side of the blanket and secure in place.

IMG_2049

A teflon foot makes the vinyl move smoothly through the machine, and a leather needle with its wedged shape will stop any skipped stitches (discovered through trial and error!)

IMG_2051

A simple long straight stitch close to the raw edge of the vinyl is all that is needed.

IMG_2047

Mitre the corners as you go for a neat finish.

IMG_2050

I was left with a few scraps of fabric and vinyl, so I also designed a fabric roll to act as a carry pack for the blanket.

For the carry pack, cut 3 floral and 2 plain squares the same size as before and sew them all together in a single row. Press.

Cut a piece of spare vinyl 1.5cm smaller than the patchwork strip and place in the centre of the strip, wrong sides together.

IMG_2054

Turn a narrow hem…..

IMG_2055

IMG_2057

….and stitch in place close to the inner folded edge around all 4 sides, mitring the corners as you go.

Cut two pieces of vinyl for the handles, each measuring 20cm x 5cm.

Fold the long upper edge in to the wrong side by 1cm, and bring the lower edge up to meet it, overlapping a little to encase the raw edge as shown below.

IMG_2060

Stitch close to the raw edge.

Repeat with the second handle.

IMG_2061

Position the two ends of the handle in the corner of the carry pack using the photograph as a guide.

IMG_2063

Stitch in place with a 1cm seam.

IMG_2064

Fold the handle to the outside and turn over, vinyl side down.

Cut a 12cm strip of velcro hook and loop fastener and sew the hook side to the fabric side of the carry pack, being sure to catch the handle in the ‘up’ position, securing it in place at the same time.

Repeat with the loop side at the other end of the carrier.

IMG_2065

When the blanket is rolled up, wrap the carry pack around it and press the velcro strips together.

IMG_2068

IMG_2066

For a picnic in the garden (or anywhere), just add bunting, a squishy cushion and a hamper full of goodies.

P1050901

Sun is a bonus for a picnic, but not when taking photographs (too much contrast)…

P1050886

The perfect fusion of girl/boy styling that anyone would be happy to sit on.

P1050903

No more damp bums!

P1050904

A lovely layer of wadding for added comfort.

P1050907

The carry pack with handles means that it’s compact and easy to transport.

P1050914

Marley was interested to see what was going on – sometimes our hens are just a little bit too friendly!

P1050911

P1050909

Now all we need is for Summer to return so we can actually use our lovely new picnic blanket!!